NETGEAR ProSAFE WC7500 User Manual

Hardware Descriptions
25
ProSAFE Wireless Controller
Figure 9. Product label WC9500
LED Functions (All Models)
The function of each LED is described in the following table. These LEDS apply to all models
except where noted otherwise.
Table 5. LED functions for all models
LED Status Description
Power LED Solid green The wireless controller is on.
Off The wireless controller is off.
If the power LED is not lit when the wireless controller is on,
check the connections and check to see if the power outlet is
controlled by a wall switch that is turned off (see Power LED Is
Not Lit on page 361).
Status LED Solid yellow The wireless controller is initializing. After approximately two
minutes, when the wireless controller completes its
initialization, the Status LED turns solid green. If the Status
LED remains solid yellow, the initialization failed (see Status
LED Never Turns Off on page 361).
Solid green The wireless controller completed its initialization successfully.
The Status LED is solid green during normal operation.
Off The wireless controller is not receiving power.
Blinking yellow Firmware is being upgraded.
Fan LED Solid green The fans are functioning correctly.
Solid yellow One or more fans are not functioning correctly.

NETGEAR ProSAFE WC7500 Specifications

General

Brand	NETGEAR
Model	ProSAFE WC7500
Category	Controller
Language	English