Configure the System and Network Settings and Register the Licenses
108
ProSAFE Wireless Controller
7. Click the Add button.
The new DHCP server is added to the DHCP Server List.
Change the Settings for a DHCP Server
You can change the settings for a DHCP server.
 To change the settings for a DHCP server:
1. Open a web browser, and in the browser’s address field, type the wireless controller’s IP
address.
By default, the IP address is 192.168.0.250.
The wireless controller’s login window opens.
2. Enter your user name and password.
3. Click the Login button.
The wireless controller’s web management interface opens and displays the Summary
page.
4. Select Configuration > System > DHCP Server.
The DHCP Server List page displays.
IP Network Enter the IP address for the wireless controller in the VLAN that you specified in
the VLAN field.
Note: If you do not select the Use VLAN Interface check box, the IP address
of the wireless controller’s management VLAN is used.
Subnet Mask Enter the subnet mask that is assigned to the WiFi clients by the DHCP server.
Default Gateway Enter the IP address of the default network gateway for all traffic beyond the
local network.
Start IP Enter the start IP address of the range that the DHCP server can assign.
End IP Enter the end IP address of the range that the DHCP server can assign.
Use Default DNS Server Select the Use Default DNS Server check box to allow the DHCP server to use
the wireless controller’s default DNS servers.
The Primary DNS Server and Secondary DNS Server fields are masked out.
Primary DNS Server Enter the IP address of the primary DNS server for the network.
Secondary DNS Server Enter the IP address of the secondary DNS server for the network.
Use Default WINS Server Select the Use Default WINS Server check box to allow the DHCP server to
use the wireless controller’s default WINS server.
The WINS Server field is masked out.
WINS Server Enter the IP address of the WINS server for the network.
Setting Description
To Next Page
Loading...
Need help?
General
