NETGEAR ProSAFE WC7500 User Manual

Factory Default Settings, Technical Specifications, and Passwords Requirements
389
ProSAFE Wireless Controller
Password Requirements
Note: We recommend that you change the administrator password of the
wireless controller to a secure password (see Change the Password
of the Default admin Account of the Wireless Controller on page 237).
The administrator password that you configure on the wireless
controller is also pushed to all managed access points.
The following table lists the password requirements.
Table 15. Password requirements
Web Management Interface Path User Type
or
Data Encryption
Restrictions Section in
This Manual
Allowed
Characters
Length
Select Maintenance > User
Management.
• Administrator
• Read Only
• Guest Provisioning
• License
Management Only
Alphanumerics and
special characters
(see footnote
1
)
Up to 31
See Manage
Users,
Accounts, and
Passwords on
page 236.
1. Select Maintenance > User
Management.
2. Click the Captive Portal Users tab.
Captive portal user Alphanumerics and
special characters
Up to 31
1. Select Maintenance > User
Management.
2. Click the WiFi Clients tab.
WiFi user Alphanumerics
only
Up to 31
Basic profile:
1. Select Configuration >
Profile > Basic >
Radio.
2. Select a profile.
3. Make a selection from
the Network
Authentication menu.
Shared Key 64-bit WEP Hexadecimal 10 fixed
See Manage
Security
Profiles for
the Basic
Profile Group
on page 124.
128-bit WEP Hexadecimal 26 fixed
152-bit WEP Hexadecimal 32 fixed
WPA-PSK TKIP Alphanumerics and
special characters,
excluding quotes
Up to 63
TKIP + AES
WPA2-PSK AES
TKIP + AES
WPA-PSK
&
WPA2-PSK
TKIP + AES

NETGEAR ProSAFE WC7500 Specifications

General

Brand	NETGEAR
Model	ProSAFE WC7500
Category	Controller
Language	English