Factory Default Settings, Technical Specifications, and Passwords Requirements
387
ProSAFE Wireless Controller
Factory Default Settings
You can restore the wireless controller to its factory default settings on the Reboot/Reset
Controllers page (see Reboot the Wireless Controller on page 259) or by using the Reset
button on the front panel (see Use the Reset Button to Restore Default Settings on
page 364). The wireless controller returns to the factory configuration settings that are shown
in the following table.
Technical Specifications Models WC7500 and WC7600v2
The following table lists the technical and physical specifications for models WC7500 and
WC7600v2.
Table 12. Factory default settings for the wireless controller
Feature Default Setting
Login User login URL http:192.168.0.250
User name (case-sensitive) admin
Login password (case-sensitive) password
LAN LAN IP 192.168.0.250
Subnet mask 255.255.255.0
Default gateway 192.168.0.1
DHCP server pools None
Time zone USA Pacific Standard Time (PST)
Time zone adjusted for daylight
saving time
Enabled
SNMP Enabled
Table 13. Technical and physical specifications models WC7500 and WC7600v2
Feature Default Setting
Electrical specifications • 100–240V, 3A, 50–60 Hz AC input
• Typical power consumption 12 W
Dimensions (W x H x D) cm 44 cm x 4.5 cm x 26.3 cm (Fits in a 1U rack)
Dimensions (W x H x D) in. 17.3 in. x 1.7 in. x 10.3 in. (Fits in a 1U rack)
Weight 7.9 kg (3.6 lb)
Operating temperatures 0° to 45°C (32° to 113°F)
Operating humidity 10% minimum to 90% maximum relative humidity
To Next Page
Loading...
Need help?
General
