NETGEAR ProSAFE WC7500 User Manual

Configure the System and Network Settings and Register the Licenses
114
ProSAFE Wireless Controller
5. Configure the settings as described in the following table.
6. Click the Apply button.
Your settings are saved.
Configure Syslog, Alarm Notification, and Email Settings
From the Alerts/Logs menu, you can configure the syslog and the alarms, and specify the
email address from which alerts originate.
Configure the Syslog Settings for an Internal Syslog Location
You can configure the settings to connect to a syslog server with an internal location.
If you use an internal syslog location, make sure that you attach and mount an extended
storage device (see Manage Extended Storage on page 260).
Log files include the following:
• debug.log: Wireless controller applications log.
• kernel.log: Wireless controller kernel log.
• message: Wireless controller applications log and syslogs from AP.
• wnc_[hostname]_[year]_[month]_[day]_[hour]_[min].log.tar.gz: Compressed file of
log messages when the total size exceeds 10 MB.
Setting Description
Password Enter the password for wireless controller certificates.
Controller Key Click the Browse button, and select the controller key.
Controller Certificate Click the Browse button, and select the controller certificate.
CA Certificate Click the Browse button, and select the CA certificate.

NETGEAR ProSAFE WC7500 Specifications

General

Brand	NETGEAR
Model	ProSAFE WC7500
Category	Controller
Language	English