Manage Security Profiles and Profile Groups
125
ProSAFE Wireless Controller
By default, an NG_11g-01 profile and an NG_11a-01 profile are present in the basic
profile group.
5. Click the tab for the radio for which you want to add a profile.
6. Click the + button to add the profile to the basic profile group.
7. To clone an existing profile, do the following:
a. Select the Clone an existing Profile check box.
The previous figure shows that you can clone an existing profile with the name
VLAN10.
b. Select a profile from the Profiles menu.
8. Click the Add button.
Click + to add another profile.
Your selection from
the Network
Authentication menu
determines the
information that is
displayed onscreen.
Select the Local radio
button to display the
Local MAC ACL
Group menu.
Select the External
radio button to display
the External Radius
Server menu.
To Next Page
Loading...
Need help?
General
