NETGEAR ProSAFE WC7500 User Manual

Manage Security Profiles and Profile Groups
130
ProSAFE Wireless Controller
 To add an advanced profile group:
1. Open a web browser, and in the browser’s address field, type the wireless controller’s IP
address.
By default, the IP address is 192.168.0.250.
The wireless controller’s login window opens.
2. Enter your user name and password.
3. Click the Login button.
The wireless controller’s web management interface opens and displays the Summary
page.
4. Select Configuration > Profile > Advanced > Radio.
5. To add a profile group, click the + button.
The new profile group displays on the Profile Groups page. By default, an NG_11g-x1
profile and an NG_11a-x2 profile, in which x is the group number, are present in a profile
group.
Note: By default, profile groups are named Group-1, Group-2, Group-3,
and so on. You cannot change these profile group names.
The following table describes the fields that are shown for each profile in a profile group.
Setting Description
Name The unique profile name.
Radio The WiFi radio in which the profile is operating.
Authentication The authentication setting under which the profile is operating.
Click + to add another profile group.

NETGEAR ProSAFE WC7500 Specifications

General

Brand	NETGEAR
Model	ProSAFE WC7500
Category	Controller
Language	English