Discover and Manage Access Points
175
ProSAFE Wireless Controller
The wireless controller’s web management interface opens and displays the Summary
page.
4. Select Configuration > WLAN Network.
The settings are described in the following table.
Setting Description
IP The IP address of the access point.
MAC The MAC address of the access point.
Model The model of the access point.
Name The name that you specified for the access point.
Building The building to which the access point is assigned. For information about selecting a
building, see Step 6.
By default, the building designation is Building-1.
For information about how to set up a custom building, see Manage a Building and
Floors for an RF Plan on page 56.
Floor The floor to which the access point is assigned. For information about selecting a
floor, see Step 7.
By default, the floor designation is Floor-1.
For information about how to set up a custom floor, see Manage a Building and
Floors for an RF Plan on page 56.
To Next Page
Loading...
Need help?
General
