NETGEAR ProSAFE WC7500 User Manual

Configure WiFi and QoS Settings
194
ProSAFE Wireless Controller
5. Click the tab for the profile group for which you want to configure the WiFi settings.
6. Click the tab for the radio for which you want to configure the WiFi settings.
7. Configure the settings in the table at the bottom of the page as described in the following
table.
Setting Description
AP Name The name of the access point.
Access Point Channel Override these settings only if a specific need exists. From the menu, select a
channel and frequency for the access point to operate in.
Note: Changing a channel might temporarily affect the traffic on the access point.
Note: By default, the access point’s channel and frequency are set to the ones
that are enabled for the radio and profile group. If the channel and frequency are
not available on the access point, the channel and frequency are set to the ones
providing the highest performance. For more information, see Configure
Channels on page 195.

NETGEAR ProSAFE WC7500 Specifications

General

Brand	NETGEAR
Model	ProSAFE WC7500
Category	Controller
Language	English