Configure WiFi and QoS Settings
196
ProSAFE Wireless Controller
However, you can override the general channel allocation settings for individual access
points on the Basic Wireless Settings page and on the Advanced Wireless Settings page. For
more information, see:
• Override Channel and Transmission Power in the Basic Profile Group
• Override Channel and Transmission Power in an Advanced Profile Group
To change the channel allocation:
1. Open a web browser, and in the browser’s address field, type the wireless controller’s IP
address.
By default, the IP address is 192.168.0.250.
The wireless controller’s login window opens.
2. Enter your user name and password.
3. Click the Login button.
The wireless controller’s web management interface opens and displays the Summary
page.
4. Select Configuration > Wireless > Basic > Channel Allocation.
To Next Page
Loading...
