NETGEAR ProSAFE WC7500 User Manual

2
ProSAFE Wireless Controller
Support
Thank you for purchasing this NETGEAR product. You can visit www.netgear.com/support to register your product, get help,
access the latest downloads and user manuals, and join our community. We recommend that you use only official NETGEAR
support resources.
Conformity
For the current EU Declaration of Conformity, visit http://kb.netgear.com/app/answers/detail/a_id/11621.
Compliance
For regulatory compliance information, visit http://www.netgear.com/about/regulatory.
See the regulatory compliance document before connecting the power supply.
Trademarks
© NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non-NETGEAR trademarks are
used for reference purposes only.
Revision History
Publication Part
Number
Publish Date Comments
202-11659-03 November 2016 • Updated license information for the WC7500 wireless controller (see
Licenses).
202-11659-02 October 2016 • Added the following new features:
- Support for model WAC740 (see Supported NETGEAR Access Points).
- Link aggregation for WAC740 access point (see Change Access Point
Information on the Managed AP List and Enable Link Aggregation on a
WAC740 Access Point).
- MU-MIMO for the WAC740 access point (see Configure WiFi Settings
for the Basic Profile Group and Configure WiFi Settings for an
Advanced Profile Group).
- Enhanced syslog support for all wireless controller models (see
Configure the Syslog Settings for an Internal Syslog Location).
- AirQual for the WAC740 access point (see Manage AirQual for a Profile
Group and View AirQual for the Channels in a Profile Group).
- Diagnostic option to send logs for controller-managed access points
over the network (see View the Console Debug Logs of an Access
Point).
- Diagnostic option to capture packets for controller-managed access
points (see Capture WiFi Packets).
• Added Appendix A, Controller-Managed Access Points, which describes
the limited web management interface for controller-managed access
points.
202-11659-01 April 2016 • First publication of the combined manual for all models.
• Introduction of model WC7500 and model WC7600v2.

NETGEAR ProSAFE WC7500 Specifications

General

Brand	NETGEAR
Model	ProSAFE WC7500
Category	Controller
Language	English