Configure WiFi and QoS Settings
217
ProSAFE Wireless Controller
The page provides a tab for each group.
5. Click the tab for the profile group for which you want to manage the LED behavior.
6. Select the tab for the model access point that you want to configure.
7. Select a radio button:
• Enable all LEDs. All LEDs function normally. This is the default selection.
• Enable Power LED. Only the Power LED functions and the other LEDs are off.
• Disable All LEDs. All LEDs are off.
8. Click the Apply button.
Your settings are saved.
To Next Page
Loading...
Need help?
General
