NETGEAR ProSAFE WC7500 User Manual

Manage Stacking and Redundancy
284
ProSAFE Wireless Controller
6. Configure the settings for the slave controller as described in the following table.
7. Click the Add button.
The wireless controller is added to the Stacking table but the local IP address for the
slave controller is not yet shown.
Setting Description
Controller IP Enter the IP address of the slave controller. This is the address that you use to log in
to the slave controller’s web management interface.
UserName The user name is a nonconfigurable field that displays the user name with which you
log in to the web management interface of the slave controller. By default, the user
name is admin.
Password Enter the password with which you log in to the web management interface of the
slave controller. If you did not yet personalize the password, enter password for the
password.

NETGEAR ProSAFE WC7500 Specifications

General

Brand	NETGEAR
Model	ProSAFE WC7500
Category	Controller
Language	English