NETGEAR ProSAFE WC7500 User Manual

Manage Stacking and Redundancy
302
ProSAFE Wireless Controller
6. Configure the settings for the redundant controller (that is, the secondary controller) as
described in the following table.
7. Click the Apply button.
Your settings are saved. The Secondary IP field displays the IP address of the redundant
controller (that is, the secondary controller).
Setting Description
Controller IP Enter the IP address of the redundant controller. This is the address that you use to
log in to the redundant controller’s web management interface.
UserName The user name is a nonconfigurable field that displays the user name with which you
log in to the web management interface of the redundant controller. By default, the
user name is admin.
Password Enter the password with which you log in to the web management interface of the
redundant controller. If you did not yet personalize the password, enter password for
the password.

NETGEAR ProSAFE WC7500 Specifications

General

Brand	NETGEAR
Model	ProSAFE WC7500
Category	Controller
Language	English