4.7 Memory Function
BP4610
4-52
4.7 Memory Function
The various settings are battery backed up, so that when the power is applied, the settings when the
power was switched off the previous time are restored. However, the response characteristics selection
is not saved. Moreover, among the various settings, the basic settings (operation mode, DC,
superimposed AC, output limiters) can be recorded to store/recall memories No. 1 to No. 30, and saved
settings can be called up for use.
The store/recall memory call operations can be performed only when output is off.
Memory control is performed in the [MEMORY] screen. After selecting an operation in Table 4-21,
specify the memory number for that operation in the Select box.
Once the memory number has been specified, the major setting contents recorded in that memory are
displayed in the left part of the Menu window.
Table 4-21. MEMORY Screen Menu Item List
Indications in Operation
Operation
STORE... Saves the setting contents to the specified memory number.
RECALL... Calls the setting contents of the specified memory number.
CLEAR... Clears the setting contents of the specified memory number.
選択したメモリ内の
設定内容を表示
Figure 4-22. Memory Contents Display Example
For the setting values after clear is executed,
refer to “9 INITIAL SETTING LIST”.
Displays setting
contents of selected
To Next Page
Loading...