NF BP4610 - Table 5-8. Overlap Command

5.2 Program Message List
BP4610
5-7
Table 5-8. Overlap Command
Header Function Max. Value Min. Value Resolution Setting Query
*OPC
When the device operation had ended, an operation
complete message in the standard event status
register is output to the device.
− − −
√
−
*OPC?
Upon completion of the device operation, 1 is
returned.
1 1 1
−
√
*WAI
Until the device operation is completed, the device
prohibits further commands or clearing from being
executed.
− − −
√
−
Table 5-9. Other
Header Function Max. Value Min. Value Resolution Setting Query
BEEP Beep
0: Off
1: On
1 0 1
√ √
HEAD Header
0: Off
1: On
1 0 1
√ √
IOUT Output on/off at power-on
0: Off
1: On
1 0 1
√ √
IRSP
Response calibrator on/off at
power-on
0: Off
1: On
1 0 1
√ √
XCTL
External control input
enable/disable
0: Disable
1: Enable
1 0 1
√ √
*RST Device reset
− − −
√
−
*TST?
Self test
Returns self-diagnosis result
at power-on
0: No error
Other than 0: Error
252 0 1
−
√
*IDN? Model name query
NF Corporation, BP4610, serial
number, version number
Example: NF Corporation, BP4610,
0000001,1.00
−
√
VERS? Version number query Example: 1.00
−
√