NF BP4610 - Setting of Frequency and Time Units

To Next Page

To Previous Page

4.9 System Menu

BP4610

4-67

4.9.5 Setting of frequency and time units

The unit used when displaying the frequency and time parameters can be specified.

The frequency unit can be selected from Hz and kHz. The time unit can be selected from s and ms.

 Operation procedure

<1> Press the

and keys to move the cursor to [FREQ UNIT] to set the frequency unit,

or to [TIME UNIT] to set the time unit.

ENTERCANCEL

<2> Press the

ENTER

key to display the Select box.

ENTERCANCEL

<3> Press the

and keys to move the cursor to the unit to be displayed.

ENTERCANCEL

<4> Press the

ENTER

key to apply the setting, or press the

CANCEL

key to cancel the setting.