5.3 Explanation of Each Program Message
BP4610
5-19
5.3.8 Overlap commands
Here, device operations refer to the following items.
• MODE: Operation mode switching
• OUTP: Output on/off switching
• *RCL: Setting read
• *RST: Device reset
• SCTL1: Sequence execution
*OPC
Description: Upon completion of the device operation, the operation complete message in the
standard event status register is output to the device.
*OPC?
Description: Upon completion of the device operation, 1 is returned.
*WAI
Description: Until the device operation is completed, the device is prohibited from further
executing commands or clearing.
To Next Page
Loading...