NF BP4610 - 8.2 Output

8.2 Output
BP4610
8-2
8.2 Output
 Operation mode
Constant voltage (CV) or constant current (CC)
 Maximum output voltage (CV)
DC: +115 V (+Vo limit +117 V, −Vo limit −7 V setting, 23 Ω load
resistance)
−1 1 5 V ( + Vo l i m i t + 7 V, −Vo limit −117 V setting, 23 Ω load
resistance)
Condition: Adjustment characteristics, external signal input
DC to 0.5 kHz: ±60 V (6 Ω load resistance)
0.5 kHz to 70 kHz: ±60 V (4 Ω load resistance)
70 kHz to 150 kHz: ±50 V (4 Ω load resistance)
Condition: Fixed characteristics, external signal input
DC to 0.5 kHz: ±60 V (6 Ω load resistance)
0.5 kHz to 40 kHz: ±60 V (4 Ω load resistance)
 Maximum output current (CC)
Condition: Adjusted characteristics, external signal input
DC to 0.5 kHz: ±10 A (6 Ω load resistance)
0.5 kHz to 30 kHz: ±15 A (4 Ω load resistance)
30 kHz to 70 kHz: ±8.3 A (6 Ω load resistance)
Condition: Fixed characteristics, external signal input
DC to 0.5 kHz: ±10A (6 Ω load resistance)
0.5 kHz to 3 kHz: ±15A (4 Ω load resistance)
3 kHz to to 10 kHz: ±13A (4 Ω load resistance)
 Output voltage, current supply range
Refer to “8.18 Output Voltage and Output Current Supply Ranges”.
 Small amplitude frequency characteristics
Condition: Output amplitude 12 Vp-p, 500 Hz reference, adjusted characteristics
CV mode: DC to 20 kHz, ±0.5 dB
20 kHz to 200 kHz, +1, −3 dB
CC mode: DC to 20 kHz, ±0.5 dB
20 kHz to 70 kHz, +1, −3dB
Condition: Output amplitude 12 Vp-p, 500 Hz reference, fixed characteristics
CV mode: DC to 10 kHz、±0.5 dB
10 kHz to 35 kHz, +1, −3 dB
CC mode: DC to 2 kHz, ±0.5 dB
2 kHz to 8 kHz, +1, −3 dB