4.2 Basic Operation
BP4610
4-7
Table 4-7. REMOTE Menu Item List
Item Name Setting Item Reference
USB ID USB ID
“4.8.1 Setting of USB ID”
LOCAL... Switch to local mode
“4.8.2 Switch to local mode”
Table 4-8. SYSTEM Menu Item List
Item Name Setting Item Reference
KEYLOCK Key lock
“4.9.1 Key lock”
BEEP Beep
“4.9.2 Beep sound”
CONTRAST LCD contrast
“4.9.3 LCD contrast adjustment”
COLOR LCD display colors
“4.9.4 Setting of LCD display colors”
FREQ UNIT Frequency unit
TIME UNIT Time unit
”4.9.5 Setting of frequency and time unit”
INIT OUT Output on/off at power-on
INIT RSP Response calibrator on/off at power-on
“4.9.6 Setting of output and response
calibrator operation at power-on”
EXT
CONTROL
Enable/disable external control input
“4.9.7 Setting of external control input
enable/disable”
RESET... Reset
“4.9.8 Reset function”
INFORMATION Display system information
“4.9.9 System information”
4.2.2 Menu tree navigation method
The menu window display items are navigated using the [UP] key and [DOWN] key. To move to the
lower menu in the menu tree, press the [ENTER] key, and to move to the higher menu in the menu tree,
press the [CANCEL] key.
The navigation method is detailed below.
<1> Select a menu item with the “
▶
” mark displayed to the right, by moving the menu cursor
displayed in the menu window with the [UP] key and the [DOWN] key.
<2> Pressing the [ENTER] key in this condition causes the lower menu to be displayed.
<3> Further pressing the [CANCEL] key in this condition causes the higher menu to be displayed
again.
<4> Further pressing the [CANCEL] key ultimately causes the top menu to be returned to.
To Next Page
Loading...