NF BP4610 - Table 4-3. SET Menu Item List; Table 4-4. MISC Menu Item List

4.2 Basic Operation
BP4610
4-5
Table 4-3. SET Menu Item List
Icon Item Reference
Selection of operation mode
“4.3.1 Setting of operation mode”
Selection of output on/off
“4.3.2 Output on/off”
Setting of response calibration function
“4.10 Response Calibration”
Setting of current voltage to be output
“4.3.3 Setting of DC voltage and DC current”
Setting of current voltage to be output
“4.3.3 Setting of DC voltage and DC current”
Setting of superimposed AC voltage
“4.3.4 Setting of superimposed AC voltage
and superimposed AC current”
Setting of superimposed AC voltage
“4.3.4 Setting of superimposed AC voltage
and superimposed AC current”
Setting of superimposed AC voltage
frequency and superposed AC current
frequency
“4.3.5 Setting of frequency”
Selection of superimposed AC waveform
“4.3.6 Setting of waveform”
Setting of + voltage limiter
Setting of − voltage limiter
Setting of + current limiter
Setting of − current limiter
“4.4 Setting of limiters”
Setting of other function use and details
“Table 4-4. MISC Menu Item List”
Table 4-4. MISC Menu Item List
Item Name Setting Item Reference
SEQUENCE Open sequence menu
“4.5 Sequence Operation”
MEMORY Open memory menu
“4.7 Memory Functions”
REMOTE Open remote menu
“4.8 Remote Control”
SYSTEM Open system menu
“4.9 System Menu”