NF BP4610 - 2. PREPARATIONS BEFORE USE

BP4610
2. PREPARATIONS BEFORE USE
2.1 Before Using the BP4610 ····················································2-1
2.2
Installation Environment ······················································2-2
2.3 Grounding and Power Supply Connection···························2-4
2.3.1 Grounding ····································································2-4
2.3.2 Power supply ·······························································2-4
2.4 Connection to I/O terminals ·················································2-5
2.4.1 Connection to power supply input terminals ················2-5
2.4.2 Connection to output pins ············································2-6
2.4.3 Connection to USB connector······································2-8
2.4.4 Connection to external control I/O connector···············2-8
2.4.5 Connection to external signal input pin ······················2-10
2.4.6 Connection to monitor output pin ······························· 2-11
2.5 Power on/off and Operation Check····································2-12
2.6 Radio Law··········································································2-13