Oce 9600 - Page 100

100 Océ 9600 Copier/Printer User Manual
Note:
Because there is no registered user, you can simply press Enter to
initiate the connection.
5
Set the transmission mode to binary by entering ‘binary’.
6
Go to the ‘tempstore’ directory using the following command: ‘cd tempstore\’.
7
Go to the ‘scan’ directory if you want to retrieve a file from a destination on
the local host,
or
go to the ‘unsent’ directory if you want to retrieve a file from ‘unsent’ folder
on the local host.
8
Get the data file (for example: bugatti.tif) via the ‘get’ command:
‘get bugatti.tif’.
9
Quit FTP by entering the ‘bye’ command.