Oce 9600 - Command line parameters

The Océ 9600 applications 125
Command line parameters
In order to start the remote applications faster, there are 6 command line
parameters available.
configfile=config_file
Specifies a configuration file you want to use. The
configuration file can have any name
server=server
Specifies the server (local host) you want to connect to.
language1=lang
Specifies the first language in combination with the
parameter ‘country1=country’
.
country1=country
Specifies the first language in combination with the
parameter ‘language1=language
’.
language2=lang
Specifies the second language in combination with the
parameter ‘country2=country’
.
country2=country
Specifies the second language in combination with the
parameter ‘language2=language
’.
Note:
You must always use a matching combination of ‘lang’ and ‘country’
(see table 68 on page 126).