297
EPA E
NERGY
S
TAR
®
Océ-Technologies B.V. has joined the E
NERGY
S
TAR
®
program of the United
States Environmental Protection Agency (EPA). The purpose of the E
NERGY
S
TAR
®
program is to promote the manufacturing and marketing of
energy-efficient equipment, thereby potentially reducing combustion-related
pollution.
Using the energy management features outlined below prevents unnecessary
power consumption, which helps to reduce air pollution from
electricity-generating plants and saves money on your utility bills.
The Océ 9600 is supplied as a printer and as a copier/printer and includes the
following separate units:
1
Océ 9600 printer
2
Océ 9600 controller
3
Océ 9600 monitor
4
Océ 9600 scanner (copier/printer only)
5
Océ 9600 folder (optional)
As an E
NERGY
S
TAR
®
partner, Océ-Technologies B.V. has determined that
both the printer and the copier/printer meet the E
NERGY
S
TAR
®
guidelines for
energy efficiency.
The EPA E
NERGY
S
TAR
®
criteria involve the following features:
Low power mode
The Océ 9600 Printer is shipped with the low power mode
default time set at 30 minutes, which means that the device automatically
enters the low power mode 30 minutes after the last print is made.(*) The low
power mode default time can be adjusted by the key operator to between 5 and
60 minutes. The low power mode recovery time is less than 1 second, after
which printing can be resumed ("instant printing", i.e. time to first print less
than 40 seconds).
The Océ 9600 has a standby mode which complies with the E
NERGY
S
TAR
®
low power mode criteria for Multifunction Devices.(*) The default time is zero
and the recovery time is less than 1 second.
To Next Page
Loading...
