Oce 9600 - System Administrator settings

System administrator settings 193
System Administrator settings
In order to perform special system administrator functions, you must log on to
the Settings Editor as a system administrator (see ‘User modes’ on page 121).
Note:
When you are finished, make certain you log out of the System
administrator mode of the Settings Editor to prevent unauthorized use of the
Océ 9600.
▼
▼▼
▼
Choose system administrator settings in the Settings Editor
1
Maximize the Settings Editor on the screen.
2
Log in as system administrator.
See ‘User modes’ on page 121 for more information about logging into the
Settings Editor.
3
Click on one of the top buttons to display the desired group of settings.
4
Select the setting you want to update in the tree structure.
5
Update the setting in the update area, as required.
Note:
A few settings, such as the default pen settings, are made directly
from the tree structure area.
6
Click on the ‘Apply’ button.
The new value is now applied for the setting
7
Log out of the System administrator mode when you are finished updating
settings.
See ‘Settings Editor’ on page 132 for more information about the Settings
Editor.