Oce 9600 - Counter

28 Océ 9600 Copier/Printer User Manual
Counter
On theOcé 9600 Printer operating panel, a counter will be displayed that gives
the user feedback about the progress of the job that is currently being printed.
The counter, located at the bottom of the upper window on the operating panel,
displays the number of sets and/or pages printed. Counting starts at 1. The
following options are available:
■
When no sets are made, only the current page and the total number of pages
are displayed (e.g. ‘Page 3 of 5’). At the beginning of a job, when the system
does not yet know the total number of pages, only the current page may be
displayed (e.g. ‘Page 5’).
■
With set input: set counter. In this case, the counter shows the current, total
number of sets and the current page (e.g. ‘Set 3 of 5, Page 10’). At the
beginning of a job, when the system does not yet know the total number of
sets, only the current set and page may be displayed (e.g. ‘Set 2, Page 5’).
■
With set input: multiple sheet counter. In this case the counter shows the
current page, the total number of pages and the current copy, e.g. ‘Page 2 of
12, Copy 5’). At the beginning of a job, when the system does yet not know
the total number of pages, only the current page and copy may be displayed
(e.g. ‘Page 2, Copy 5’).