58 Océ 9600 Copier/Printer User Manual
Non-standard size originals
The scanner of the Océ 9600 system automatically detects the width of the
inserted original. For Example: with European sizes, it detects whether the
width is A0, A1, A2, A3, A4, 500 mm, or 700 mm. The Océ 9600 system uses
a memory table that contains all standard width - standard length combinations
to predict the length of the original. The scanner also measures the real length
of each original while it is transferred through the scanner.
Note:
If you are copying thick, thin or damaged originals or originals in a
carrier sheet, we recommend that you use the output at the rear side of the
scanner to ensure correct delivery (see ‘Delivering originals after scanning’
on page 52).
To Next Page
Loading...
