Oce 9600 - Media type and size on the printer

32 Océ 9600 Copier/Printer User Manual
Media type and size on the printer
One of the features of the Océ 9600 printer is the automatic media change
function. This function allows the printer to switch to another roll of the same
format and copy material when the roll or cassette tray becomes empty during
printing.
Note:
Because the Océ 9600 Printer cannot detect the loaded copy material
type and format itself, you have to specify type and size after you (re)load
media, as described in ‘Media’ on page 219.
See ‘List of available material types and sizes’ on page 288 for an overview of
all materials that can be used on the Océ 9600 Printer.
▼
▼▼
▼
Set media type
1
Press the on line button on the printer operating panel to put the printer off line.
The ‘Off line’ message is displayed in the status window.
[10] Operating panel in off line mode
The focus is shifted to the Media option (indicated by the shadow effect).
2
Use the Up/Down buttons to select the roll or cassette tray for which you have
just loaded new media.