Oce 9600 - Océ 9600 Optional Features

Introduction 21
See chapter 9, ‘The Océ 9600 applications’ on page 119 for more information
about the Océ 9600 Settings Editor application.
Scan Manager
The Scan Manager is an application available only locally on
the controller. With the Scan Manager you can:
■
configure the destinations for ‘scan to file’.
■
increase your productivity with automatic file naming.
See chapter , ‘Scan Manager’ on page 90 for more information about the Océ
9600 Scan Manager application.
Océ 9600 optional features
By default, the Océ 9600 is equipped with an Integrated Receiving Tray (IRT)
as the output delivery device. The IRT is the rack on top of the machine (see
figure 1 on page 12). A number of optional features are also available with the
Océ 9600. These include:
Rolls and cassette trays
The Océ 9600 is available in many configurations,
ranging from two rolls in a single drawer, to four rolls in two drawers plus three
cassette trays. A maximum of six rolls (in combination with one sheet feeder)
and three sheet feeders (in combination with four rolls) can be configured.
Note:
Contact your Océ representative if you want to know more about the
available configurations.
Each of the rolls and cassette trays on the Océ 9600 may be loaded with print
material of a different size or type. The size and type of the available media are
indicated on the operating panel.