Oce 9600 - Job-Related Settings for Copying (Single)

Key operator settings 141
Job-related settings for copying (single)
Output mode
Description
The option ‘Output mode’ allows you to define the destina-
tion of the output: Copy: the output will be printed on paper.
File; the output is saved as a print file and can be printed on
paper at a later time.
Min/max values
N/A
Menu path
Jobs - Copy & File - Defaults - Output mode - <value> - Ap-
ply
Checkplot
Description
Use ‘Checkplot’, to define that a paper copy will be made of
each scanned original.
Min/max values
N/A
Menu path
Jobs - Copy & File - Defaults - Checkplot - <value> - Apply
Number of prints/sets
Description
Use ‘Number of prints/sets’, to define the default number of
copies for each job in the printer memory.
The default value is 1. The maximum number of copies is
999.
Min/max values
1 - 999
Menu path
Jobs - Copy & File - Defaults - Number of prints/sets - <val-
ue> - Apply
Zoom method
Description
The Océ 9600 has a custom, automatic and 1-to-1 scaling
option.
‘Custom’ allows you to define the zoom ratio.
If you select ‘Automatic’, a zoom ratio will be calculated,
based on the original size and the copy media size.
1-to-1 means there is no zoom ratio.
Menu path
Jobs - Copy & File - Defaults - Zoom method - <value> - Ap-
ply