Oce 9600 - Printer Descriptive Language settings (groups)

System administrator settings 197
Note:
The minimum and maximum number should be the same
.
Printer Descriptive Language settings (groups)
The Printer menu in the SA settings of the Settings Editor allows you to define
specific settings for the available printer languages and to change pen settings
for the supported vector languages.
The Océ 9600 accepts print files in various data formats (languages). These
include HP-GL, HP-GL/2, Calcomp, Postscript level 2, NIRS, C4, TIFF,
CALS and ASCII. You can change the settings for HP-GL, HP-GL/2, Calcomp
and ASCII. The other available languages can only be enabled or disabled.
On the Océ 9600, a number of settings are available which allow the system
administrator to specify, by connection type, which printer languages are
accepted for automatic data format recognition and which language is forced.
These settings are called ALS (Automatic Language Sensing) settings.
Poker max number of vertices in polygons
Description
This setting specifies the maximum number of vertical poly-
gons that can be correctly handled by the printer. If you se-
lect a very high value, a great deal of memory will be used
and performance degradation may occur.
Min/max values
1024 - 35000
Menu path
Printer - PDLs - Poker max number of vertices in polygons
- <value> - Apply
Scale down algorithm
Description
Use 'Scale down algorithm', to scale down a bitmap. If you
use 'Sampling', all information will be sized down. This
means that you may lose thin lines. If you use 'Black pixel
conservation' to scale down the bitmap, all information will
be kept.
Min/max values
N/A
Menu path
Printer - PDLs - Scale down algorithm - <value> - Apply