Oce 9600 - How to access the Settings Editor; How to perform actions from the Settings Editor

Key operator settings 137
How to access the Settings Editor
In order to perform special key operator functions, you must log on to the
Settings Editor as a key operator.
Because these functions are restricted to a dedicated key operator, a password
is required to access them. The service engineer will provide this password to
you upon installation.
Note:
Only one key operator or system administrator at a time is authorized to
make modifications. However, multiple users may view the settings. When a
second user tries to log in as Key Operator or as System Administrator, an
error message is displayed.
How to perform actions from the Settings Editor
You can perform a number of activities from the Settings editor. These
activities include:
■
Save settings to file
■
Load settings from a file
■
Specify the custom card.
Save and load settings
All key operator and system administrator settings can
be saved in a file or loaded from a file. This way, you can have different settings
for different customers, departments or other situations.
Note:
These settings can only be saved in Key operator or System
administrator mode.
▼
▼▼
▼
Save settings to file
1
Open the ‘File’ menu and select ‘Save as’.
You now have two possibilities:
■
If the client is a local client, a dialog is displayed and the user can supply a
file name. The file is saved in a predefined directory on the system.
■
If the client is a remote client, a dialog box is displayed and the user can
supply a directory and a file name.
Note:
All settings in the current view mode are saved; not only the ones that
are currently visible.
A few special files are available here: