Oce 9600 - Specify the custom card

138 Océ 9600 Copier/Printer User Manual
■
Default.kos/Default.sas
These files contain the factory default settings for the key operator and
system administrator, respectively, and cannot be changed.
■
Backup.kos/Backup.sas
These files contain a previous version of the settings for the key operator and
system administrator, respectively (before the last application of settings).
■
Current.kos/Current.sas
These files contain the version of the settings for the key operator and system
administrator after the last application of settings.
When an new settings are applied, the contents of the current settings are
copied to the backup file. There are two versions of this file, one for KO
settings and one for SA settings. These files are always stored on the system.
▼
▼▼
▼
Load a settings file
1
Open the ‘File’ menu and select ‘Open’.
A dialog box is displayed from where you can choose the correct file.
2
Click on the ‘Apply’ button.
The loaded settings are transferred to the system.
Note:
This is only possible if the user is logged in as a key operator or system
administrator.
▼
▼▼
▼
Specify the custom card
The custom card on the scanner panel contains high priority settings. Because
there is only room for five default settings on the basic card and there are more
functions that might qualify, the custom card is programmable.
This option allows you to add or delete current settings on the custom card. In
the left window, all available setting groups are displayed. In the right window,
all the current settings are displayed. You can use the two arrow buttons
between the two windows to add settings to or remove settings from the custom
card.
1
Click on the ‘Scanner’ button.
2
Select the ‘Custom card’ tab.
3
Press the upper arrow button to add settings to the custom card. The maximum
number of settings that can be added to the custom card is five.
4
To change the order of the settings on the card, click on one of the buttons on
the right of the ‘Custom card’ window.
5
Click on the ‘Apply’ button to save any changes you have made.