Key operator settings 135
Tree structure
Most settings are displayed using a tree structure. By clicking
on the settings, folders can be opened to show all the entries or closed to hide
all the entries below these folders.
The settings for system components that are not available are not displayed.
Therefore, if you do not have a folder, no folder settings are available. This
means that different configurations result in different tree structures.
Note:
When a tree item has been changed, this item will be marked with a
bullet.
Update area
The user can move through the tree and select a setting. If he
selects a setting for which he is authorized, he can edit the setting in the update
area.
If the user is not authorized for a particular setting, the update area is grayed
and no changes can be made.
Note that a few settings, such as basic card and pen settings, are not edited from
the tree structure, but are accessed directly from the settings area.
The update area contains some additional information about the selected
setting. This includes a brief definition of the setting, as well as the minimum,
maximum and default values (if appropriate).
[72] Settings area
General control buttons
The Settings Editor contains two general control buttons: ‘Apply’ and ‘Undo’.
To Next Page
Loading...
