Oce 9600 - Media

Loading supplies 219
Media
The Océ 9600 is available in many configurations, ranging from two rolls in a
single drawer, four rolls in two drawers plus three cassette trays and a
maximum of six rolls with one cassette tray.
Note:
Contact your Océ representative if you want to know more about the
available configurations.
Each of the rolls and cassette trays on the Océ 9600 may be loaded with print
material of a different size or type. The size and type of the available media are
indicated on the operating panel.
Note:
In case you have three cassette trays, no A4 size material and no A3
landscape material can be used in the bottom cassette trays. The minimum size
of media in the third cassette tray is A2.
Attention:
After loading new print material, you need to inform the system
about the size of the material and of the type of print material that was
loaded (paper, transparent, or polyester).
The definition of the size and type of the new print material is required in order
to:
■
Enable the automatic media switch function to work correctly (see
‘Automatic roll switch’ on page 174)
■
Prevent folding errors (when a folder is installed)
■
Support autozoom and auto format functions.
Caution:
It is highly advisable to place heavy rolls (A0, A1, and 175 meter
rolls of plain paper) in position 1 of the top drawer, position 3 of the middle
drawer or position 5 of the bottom drawer, to minimize user strain. The
diameter of rolls should not exceed 185 mm (6.5 inches).