Oce 9600 - Managing print jobs

Managing print and copy jobs 79
Managing print jobs
The Océ 9600 Queue Manager allows you to perform the following operations:
■
View the print queue
■
Abort the job currently being printed
■
Delete job(s) in the queue
■
Put job(s) in the queue on hold
■
Restart job(s) that were previously put on hold in the queue
▼
▼▼
▼
View the print queue
The Océ 9600 Queue Manager displays all jobs sent to the print queue in a list
sorted according to the order in which they are expected to be printed. This
ordering can be changed by deleting jobs, putting jobs on hold or restarting
jobs currently on hold. This list will be automatically updated.
Note:
Queue operations can only be performed when you are properly
authorized. Before you can use the Queue Manager in a different mode, you
first have to enter a password to get the required access (see ‘User modes’
on page 121).
▼
▼▼
▼
Abort the job currently being printed
1
Click on the Abort button to the right of the active print job window. The active
job will now be aborted.
Note:
To abort the job which is currently being printed on the controller, no
password is required. To abort the current job from a remote client, you
need repro operator, key operator or system administrator rights.
Note:
Consider carefully before you use the Abort button. An abort
operation cannot be undone.