Oce 9600 - Resolution; Zoom

88 Océ 9600 Copier/Printer User Manual
Resolution
The Océ 9600 scan-to-file option allows you to scan at the following three
resolutions:
■
200 dots per inch (dpi)
■
300 dpi
■
400 dpi
The higher the resolution, the better the image quality. Higher resolution also
leads to larger file sizes. The default value is 200 dpi.
Zoom
The ‘Zoom’ option allows you to scale while scanning to a file. When you set
‘File mode’ to ‘On’, the automatic ‘Zoom’ setting will result in ‘1:1’. You can
change this default setting into one of the following three settings:
Custom
This option let’s you specify a custom zoom value. You can enter a
range from 25% to 400%. This value also shows the zoom value when the
‘Automatic’ option is chosen.
1:1
With this option selected, scan-to-file will result in an image that is exactly
the same size as the original. ‘Zoom’ displays 100%.
Automatic
Selecting ‘Automatic’ always results in a 1:1 scan to file.
Optimization
There are two ways to optimize a scan to file.
Scan quality
optimizes for the best image quality. The scan resembles the
original as much as possible.
File size
optimizes for better compression. Generally resulting in a smaller file
size and an image quality comparable to copy quality.