112 Océ 9600 Copier/Printer User Manual
▼
▼▼
▼
Setting up a remote session (only on a remote system)
1
Click on the Connect to option in the File menu.
A dialog box will appear containing all the available 9600 systems.
2
Select one of the available 9600 systems and click on
OK
.
Note:
If the system you want to connect to is not available in the list, you
can click on the Edit... button. A dialog box will appear which allows you
to manually add a 9600 system. For this, you will need a valid IP address.
▼
▼▼
▼
Quitting a remote session (only on a remote system)
1
Select the Exit option in the File menu when the System Control Panel has
been installed on a remote client.
The remote SCP session is now terminated.
To Next Page
Loading...
