Oce 9600 - Page 164

164 Océ 9600 Copier/Printer User Manual
Add leading / trailing strip
Description
Use the add leading or trailing strip settings to add a blank
strip at the top or bottom of the image and make this the de-
fault setting. The print length will increase accordingly.
‘Add leading strip’ will add a blank strip at the top of the im-
age.
‘Add trailing strip’ will remove a blank strip at the bottom of
the image.
You can remove up to 400 mm or 16 inches in increments of
1 mm.
Note: Add leading or trailing strips will always work, unless
you try to remove the entire plot.
Min/max values
0 - 16 inches
Menu path
Jobs - Print - Defaults - Sheet - Strip - Add leading / trailing
strip - <value> - Apply
Remove leading / trailing strip
Description
Use the ‘remove leading or trailing strip’ settings to set the
removal of a blank strip at the top or bottom of the image as
default. The print length will decrease accordingly.
‘Remove leading strip’ will remove a blank strip at the top of
the image.
‘Remove trailing strip’ will remove a blank strip at the bot-
tom of the image.
You can remove up to 400 mm or 16 inches in increments of
1 mm.
Note: Remove leading or trailing strips will always work,
unless you try to remove the entire plot.
Min/max values
0 - 16 inches
Menu path
Jobs - Print - Defaults - Sheet - Strip - Add leading / trailing
strip - <value> - Apply