Oce 9600 - Page 210

210 Océ 9600 Copier/Printer User Manual
[98] Making system settings
Host name
Description
To specify the name with which the Océ 9600 will present
itself on the TCP/IP network. To identify the controller, you
have to enter the host name. Keep the following:
- use no more than 15 characters.
- choose characters from the following series: a-z; A-Z; 0-9.
- if you use a hyphen, put it somewhere in the middle of the
name, not at the beginning nor at the end.
Min/max values
N/A
Menu path
System - Controller identification - Hostname - <value> -
Apply
Description
Description
To enter additional information about the system. It is not
mandatory to fill in this field.
Min/max values
N/A
Menu path
System - Controller identification - Description - <value> -
Apply
Location
Description
To enter additional information about the system. It is not
mandatory to fill in this field.
Min/max values
N/A
Menu path
System - Controller identification - Location - <value> - Ap-
ply
Administrator
Description
To enter the name of the system administrator.
Min/max values
N/A
Menu path
System - Controller identification - Administrator - <value>
- Apply