Oce 9600 - Page 213

System administrator settings 213
Centronics
Setting Description
Enable Centron-
ics
To define if Centronics communication is enabled or dis-
abled.
Plot time-out
To define the plot time-out on a Centronics connection.
1 - 1000 s
Communication
mode
To define the communication mode for a Centronics connec-
tion. With ‘Print while spool’, the data will be spooled in
chunks. With ‘spool then print’, the complete job will be
spooled before printing starts.
PDL selection
To define the PDL enabled for a Centronics connection. The
Automatic option enables Automatic Language Sensing.
FTP
Setting Description
Enable FTP
To specify whether or not FTP communication is enabled or
disabled.
Time-out
To define the plot time out on a FTP connection.
60 -900 s
Communication
mode
To define the communication mode for an FTP connection.
With ‘Print while spool’, the data will be spooled in chunks.
With ‘spool then print’, the complete job will be spooled be-
fore printing starts.
PDL selection
To define the PDL activation for a FTP connection. The Au-
tomatic option enables Automatic Language Sensing.
LPD
Setting Description
Enable LPD
To specify whether or not LPD communication is enabled or
disabled.
Communication
mode
To define the communication mode for an LPD connection.
With ‘Print while spool’, the data will be spooled in chunks.
With ‘spool then print’, the complete job will be spooled be-
fore printing starts.
PDL selection
To define the PDL activation for a LPD connection. The Au-
tomatic option enables Automatic Language Sensing.