Oce 9600 - Page 283

283
Océ 9600 Controller
Platform
Océ Controller with embedded Windows NT
Memory
128 MByte RAM standard, 256 MByte RAM for scan
to file
Disk space
High-speed hard disk dedicated to file spooling, and a
high-speed hard disk dedicated to set memory offer-
ing 250 A0 storage capacity
File formats
HPGL, HPGL2, HPRTL, TIFF 6.0, CALS type 1,
NIRS, EDMICS (C4), CalComp 906/907/951,
PostScript Level 2 (optional)
Interfaces
Standard: Ethernet 10/100 Mbits/s with RJ45
Optional: Ethernet 10 Mbits/s with BNC and SubD;
TokenRing 4/16 Mbits/s; Centronics
Network protocols
TCP/IP, NetBEUI (smb), Novell (IPX, SPX)
Power consumption
<75 W controller; 200 W monitor
Electrical require-
ments
120/230 V, 50/60 Hz
Scanner
Model
Free-standing console
Optional: Original delivery tray
Technology
CCD, Océ Image Logic real-time image processing
hardware
Speed
5 linear meters per minute or approximately 4A0s per
minute
Original feed
Face down, right aligned
Automatic feed off/on
Rewind original to front off/on
Originals
Automatic original size detection
8 - 36 inches
Original width: 8 –40.16 in
Original length: 6 - 590 inches
Maximum thickness
0,04 in
Exposure control
Automatic, manual fine adjustment
Special modes:
Lines & Text (default), Photo, Grays &
lines, Dark Original, Blueprint, Printed matter
Media selection
Manual or automatic, based on original size (autodetect)
and zoom factor
Reproduction scale
Zoom: 25 % - 400 % (adjustable in 1 % and 0.1 % steps)
Programmed fixed steps
Auto zoom to paper size