92 Océ 9600 Copier/Printer User Manual
It is possible that there are more files in the table than fit on the screen. The
most recently scanned files appear at the end of the table. Under these
circumstances, it is possible that your most recent scanned file is not visible in
the on-screen table. In this case, you can update the table view.
▼
▼▼
▼
Update the table view
1
From the ‘View’ menu select ‘Refresh’ or click the ‘Refresh’ button on the
toolbar (see figure 47). If the opened destination is also the one which is
currently scanned to, the view is automatically updated.
[47] ‘Refresh’ button on the toolbar
To Next Page
Loading...
