Oce 9600 - Page 97

Scan to file 97
▼
▼▼
▼
Delete a scanned file
1
Select a file in the right-hand pane.
2
Open the ‘File’ menu and select ‘Delete’ or click the ‘Delete’ button on the
toolbar (see figure 54).
[54] ‘Delete’ button on the toolbar.
The selected file will be deleted.
Note:
This option is only available if you are logged on as a Key operator
or as a Repro operator.
▼
▼▼
▼
View properties of a scanned file
1
Select a file in the right-hand pane.
2
Open the ‘File’ menu and select ‘Properties’ or click the ‘Properties’ button on
the toolbar (see figure 55).
[55] ‘Properties’ button on the toolbar.
The following window appears (see ‘‘Scanfile properties’ window’ on
page 97):
[56] ‘Scanfile properties’ window
3
Click OK to close the ‘Scanfile properties’ window.