APPLIED OPERATIONS/Image Acquisition
OPERATION INSTRUCTIONS
2-20
Page
3 Setting the Channels
1. In the Channel 1 group box, check the check box showing the applicable dyeing
method to make the image acquisition ready.
2. In the Channel 2 group box, check the check box showing the applicable dyeing
method to ready the image acquisition.
3. In the Channel 3 group box, check the check box showing the applicable dyeing
method to ready the image acquisition.
4. In the Channel 4 group box, check the check box showing the applicable dyeing
method to ready the image acquisition.
To display the information on all channels simultaneously, right-click the
boundary between channel display boxes.
Click the boundary again to return to the original display.
CH4 check boxCH1 check box
CH2 check box
CH3 check box
TIP
To Next Page
Loading...
