APPLIED OPERATIONS/Image Acquisition
OPERATION INSTRUCTIONS
2-21
Page
4 Setting the Highest Scan Speed
Set the scan speed to the fastest speed by using the scale in the [Scan Speed] group box in
the [Acquire] panel
The focus mode makes it possible to increase the line skipped scan speed.
From the page tabs on the bottom right of the [Acquire] panel, select the
[Settings] sub-panel.
Select either option button in the [Focus Mode] group box.
The focus mode is enabled when acquiring images using the <Focus> button.
The Focus function reduces the scanning time by line skipped scan. As a
result, the acquired images become coarse.
[Scan Speed] group box
Set the scan speed by clicking a point on
the scale line.
TIP
[Focus Mode] group box
[X2] option button
cquires image at twice the
highest speed.
[X4] option button
Acquires image at 4 times
the highest speed.
Increasing the number o
divided images in the
image window, line skipped
scan at 4 times (Focus)
cannot be done.
NOTE
To Next Page
Loading...
