APPLIED OPERATIONS/Image Acquisition
OPERATION INSTRUCTIONS
2-30
Page
1 Acquiring Image in Accumulation Mode (Frame mode)
1. From the page tabs on the bottom right of the [Acquire] panel, select the [Settings]
sub-panel.
Fig. 2-11 [Settings] Sub-panel
2. In the [Filter Mode] group box, select the [Kalman] or [Accumulate] option button.
3. When [Kalman] is selected, enter the accumulation count in the text box. And select the
<Frame> button displayed.
The accumulation count can be set up a maximum of 64 times.
When 0 is set as the number of times of accumulation, the number is set to 1
automatically.
[Filter Mode] group box
Select the accumulation mode.
Two accumulation modes, [Kalman] and
[Accumulate To Peak] are available.
<Frame> button
Enter the accumulation count.
TIP
To Next Page
Loading...
