APPLIED OPERATIONS/Image Acquisition
OPERATION INSTRUCTIONS
2-31
Page
4. When [Accumulate] is selected, enter the addition count in the text box.
5. Click the <Once> button in the [Acquire] panel.
The acquired image will be displayed in the [Live] panel.
2 Acquiring Image in Accumulation Mode (Line mode)
Image acquisition in the line mode can be performed when you use the
FV1000 system with AOTF (FV5-COMBA).
1. From the page tabs on the bottom right of the [Acquire] panel, select the [Scan] sub-
panel.
Fig. 2-12 [Scan] sub-panel
2. In the [Filter Mode] group box, select the [Kalman] option button.
NOTE
[Filter Mode] group box
Select the accumulation mode.
Two accumulation modes, [Kalman] and
[Accumulate To Peak] are available.
To Next Page
Loading...
