APPLIED OPERATIONS/Image Acquisition
OPERATION INSTRUCTIONS
2-95
Page
4. Change the curved line shape. Place the mouse pointer within the box and right click to
display the pop-up menu. Then select <Edit>.
The cross shaped handles appear around the curve. Place the mouse pointer on either
handle and drag it to change the line shape. The color of the mouse pointer is changed
on the handle.
The handle can be added by clicking the mouse on desired coordinates.
To delete the handle, right click the mouse on it.
Right click the mouse on the coordinates but the handles to fix the shape after the
change.
5. Set the scan speed for image acquisition.
Set the speed in the [Scan speed] group box of the [Acquire] panel.
The speed recommended for this scan mode are as follows.
2µs: The scroll bar indicates “Fast” position. It is useful for the specimen
changes rapidly.
4µs, 8µs : The scroll bar indicates “Slow” position. It is useful for the
specimen changes slowly.
Handle
TIP
To Next Page
Loading...
